with the computer keyboard.
Registering a Destination (Profile) from Configuration Tool
This section describes the registration method that uses the Configuration Tool on a
computer.
If you click
(Save to device), the changed settings are reflected to this machine.
Note
To use the Profile Manager, install the User Setting plug-in. You can install the User Setting
plug-in at the same time as when installing Configuration Tool or install the plug-in later.
Installing Software
You must register the machine in Configuration Tool in advance.
Starting Configuration Tool
1.
Click [Start], and then select [All Programs] > [Okidata] >
[Configuration Tool] > [Configuration Tool].
2.
Select the machine from [Registered Device Table].
3.
Select the [User Setting] tab.
4.
Click [Profile Manager].
234