Using Configuration Tool (Windows Only)
You can set Auto Power Off from Configuration Tool.
Set the length of idle time before entering Auto Power Off.
1.
Click [Start], and then select [All Programs] > [Okidata] >
[Configuration Tool] > [Configuration Tool].
2.
Select the machine from [Registered Device Table].
3.
Click the [Device Setting] tab.
4.
Click [Menu settings].
5.
Click
(Display administrator settings).
6.
Enter the administrator password, and then click [OK].
7.
Click
in order of [Admin Setup] > [Management] > [Power
Save].
8.
Select the transition time from [Auto Power Off Time], and then
click
(Save to device).
Available transition time settings:
1 hour,
2 hours,
24 hours
* indicates the factory default setting.
3 hours,
4 hours*,
893
8 hours,
12 hours,
18 hours,