Registering The Sender Name (Originator) - Oki MC853 User Manual

Registering the Sender Name (Originator)

You can change the sender name (originator) that is printed on a sent fax. To change the
name, you must register the originator name in advance.
Before using the following function, check that the [TTI] setting is enabled.
Disclosing a Sender Name (Originator) to the Recipient
Note
Only use alphanumeric characters for [Sender ID].
Memo
If you set [Sender ID], the name is automatically registered to [TTI 1].
Easy Setup
You can register up to three sender names (originators).
1.
Press [Device Settings] on the touch panel.
2.
Press or
3.
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "aaaaaa"
respectively.
4.
Press or
5.
Press or
6.
Press an originator number to register.
7.
Enter a name.
You can enter up to 22 characters.
8.
Press [OK].
9.
Press [Back] until the home screen is displayed.
Topics
Disclosing a Sender Name (Originator) to the Recipient
Changing the Sender Name That is Printed on Faxes
several times and press [Admin Setup].
several times and press [User Install].
several times and press [TTI Register/Edit].
507