Using The Wia Driver (Windows Only) - Oki MC853 User Manual

Using the WIA Driver (Windows Only)

This section describes how to start scanning from a WIA compatible application via USB or
WSD Scan connection.
Memo
The WIA driver does not support the network scan function. Connect the machine to a
computer via a USB interface or WSD Scan.
The WIA driver does not support Mac OS X.
The WIA 2.0 driver supports Windows 8.1/Windows Sever 2012 R2/Windows 8/Windows
Server 2012/Windows 7/Windows Server 2008 R2.
The WIA 1.0 driver supports Windows Vista/Windows Server 2008/Windows Server 2003.
To scan using WIA Driver, preparation procedure such as installation of the scanner driver is
required.
Before Using Remote Scan
You also need to set the machine in the stand-by mode for Remote Scan before starting
scanning on the computer.
How to Use Remote Scan
Scanning
Memo
The following procedure uses PaperPort as an example.
1.
Set a document in the ADF or on the document glass.
2.
Start Adobe Photoshop CS3 on the computer.
3.
Select [Import] from [File], and then select [WIA: OKI Universal
WIA] for the USB connection or select [WIA-OKI-XXXXX] for the
WSD scan.
4.
Click [Scan].
5.
Select a paper feed method.
6.
Select an image type.
7.
Specify the area to scan.
8.
Click [Scan].
9.
To complete scanning, click [Cancel].
272