Sending a Fax (Procedure)
1.
Press [Fax/Internet Fax] or the
The touch panel display switches to the fax/Internet fax top screen.
2.
Set a document in the ADF or on the document glass.
3.
Press [Fax].
4.
Specify a destination.
Specify a destination in one of the following ways.
Specifying a Destination (Direct Entry)
Specifying a Destination (Phone Book)
Specifying a Destination (One-touch Button)
Specifying a Destination (Transmission History and Reception History)
5.
Change settings if necessary.
Memo
If you press the
default) settings are applied for scanning and sending a document.
[Scan Size]: Auto
[Resolution]: Normal
[Density]: 0
You can change the default settings with [Admin Setup].
Fax Setup
When [Rotate Tx] is ON, A4
respectively.
(START) button without changing anything, the following (factory
is sent as A4
436
(FAX) button.
and Letter
is sent as Letter