Registering from the Operator Panel
Registering from the Web page
You can register and edit the e-mail address of this machine and server information with the
Web page of this machine. When registering and editing the server information, the content
in the setting information sheet is required.
The setting procedure varies depending on the protocol that the machine uses for receiving
e-mails.
Memo
The setting information is provided from your provider when you make a contract. If you do
not have the setting information, check with your provider or network administrator.
If you do not have any e-mail address that this machine uses, obtain the e-mail address by
making a contract with a provider or using other ways.
Setting the Reception Protocol
Easy Setup
Registering from the Operator Panel
You can register and edit the e-mail address of the machine and server information with the
operator panel on the machine. When registering and editing the server information, the
content in the setting information sheet is required.
Set the reception method for the machine to receive e-mails. If you want to receive and
print e-mail attachment files that are sent to the machine, select [POP3] or [SMTP] to suit
your e-mail setting environment. If you do not want to receive e-mails, select [Disable].
Note
If you use a free mail server or any mail server other than that is provided by your Internet
service provider, You cannot set with Easy Setup.
If you press [Device Settings], and then select [Admin Setup] > [Network Menu] > [Mail Server
Setup], the detailed mail server settings are displayed on the screen where you can perform the
setting.
Memo
The setting information is provided from your provider when you make a contract. If you do
not have the setting information, check with your provider or network administrator.
If you do not have any e-mail address that this machine uses, obtain the e-mail address by
making a contract with a provider or using other ways.
Setting the Reception Protocol
Easy Setup
197