Table of Contents
Advertisement
Erasing Edge Shadows (Edge Erase)
When you scan a document with the document glass cover opened or when you scan a
book, a black shadow may appear around the edges on the scanned image. The edge erase
function allows you to erase the black shadow.
Memo
[Edge Erase] is set to [ON], and [Width] to 5 mm by factory default.
The default value of the edge width to erase can be changed from [Admin Setup] > [Scanner
Setup] > [Default Settings] > [Edge Erase] > [ON] > [Width].
1.
Press [Scan] or the
2.
Set a document in the ADF or on the document glass.
3.
Select a scan method.
Sending Scanned Data as an E-mail Attachment
Saving Scanned Data in USB Memory
Saving Scanned Data in a Shared Folder
Specify a destination by following the procedure for the selected scan method.
4.
Press [Edge Erase] on the [Image Settings] tab.
5.
Enter a value from 5 to 50 mm (0.2 to 2.0 inches) in [Width] by
using the 10-key pad or pressing
then press [OK].
6.
Change other settings if necessary, and then press the
button.
(SCAN) button.
171
on the touch panel, and
(START)
Advertisement
Table of Contents
