Table of Contents
Advertisement
Adjusting the Density (Density)
You can adjust the density in seven levels.
1.
Press [Fax/Internet Fax] or the
2.
Set a document in the ADF or on the document glass.
3.
Press [Internet Fax].
4.
Press [Density] on the [Image Settings] tab.
5.
Select density.
Memo
Alternatively, you can set this setting from [Function Settings].
[0] is the standard value. To increase the density, select [+1], [+2], or [+3] (darkest).
To decrease the density, select [-1], [-2], or [-3] (lightest).
6.
Specify a destination.
Specifying a Destination (Direct Entry)
Specifying a Destination (Address Book/Group List)
Specifying a Destination (One-touch Button)
Specifying a Destination (Transmission History)
Specifying a Destination (LDAP Server)
7.
Change other settings if necessary, and then press the
button.
Topics
You can change other settings for fax transmissions.
Setting Scanning for Transmission
Sending an Internet Fax (Procedure)
(FAX) button.
476
(START)
Advertisement
Table of Contents
