Initializing Flash Memory
Saved e-mail templates and other data are stored in Memory.
Initialize Memory by following the procedure below.
Note
When you initialize Memory, the following data is deleted.
The job data saved with [Secure Print], [Encrypted Secure Print], [Store to Printer] or [ID
Secure Job].
Custom demo data
Form data
1.
Press [Device Settings] on the touch panel.
2.
Press
or
3.
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "aaaaaa"
respectively.
4.
Press
or
5.
Press [Storage Maintenance Setup].
6.
Press [Initial Lock] to change the display to [Disable].
7.
Press [Back].
8.
Press [Flash Memory Setup] or select a storage to format from
"HDD Setup".
9.
Press [Initialize].
10.
If HDD is selected in Step 9, press [Format Partition], and then
select from the following types. The menu in Step 11 appears only
when "HDD Setup" is selected.
Available selection types:
PCL,
Common,
Memo
Select from 2 ways of initializing Memory.
[Initialize]: Initializes the range of open area of Flash (displayed on File List).
[Format Partition]: Initializes user information.
several times and press [Admin Setup].
several times and press [Management].
PS
686