Table of Contents
Advertisement
How to Use Remote Scan
Simple Scan Mode
Manual Scan Mode
Secure Scan Mode
You can send scanned images to a computer that is connected via a network or USB
interface. You can scan documents set on the machine by operating on the computer.
To use Remote Scan, you must prepare the following:
Before Using Remote Scan
Set the machine in the stand-by mode for Remote Scan before starting scanning on the
computer. The procedure depends on the Remote Scan mode.
See the following:
Simple Scan Mode
Manual Scan Mode
Secure Scan Mode
The required operation on the computer depends on the operation system of your computer
and connection method.
On the Windows computer, ActKey, TWAIN compatible applications (TWAIN Driver), WIA
compatible applications (WIA Driver, WSD Scan) can be used.
Using ActKey (Windows)
Using the TWAIN Driver (Windows)
Using the WIA Driver (Windows Only)
If you use Mac OS X, you can use Image Capture.
Using Image Capture (Mac OS X)
Simple Scan Mode
In the Simple Scan mode, you can start scanning from a computer while the default screen
is displayed on the operator panel.
Memo
Scanning can be started only if the machine displays the screen shown as follows.
[Device Settings] > [Admin Setup] > [Management] > [Default Mode]
1.
Press
2.
Set a document in the ADF or on the document glass.
3.
Start a scan program on a computer.
4.
Start scanning from the program.
(Home).
256
Advertisement
Table of Contents
