Table of Contents
Advertisement
3.
Install the scanner driver and ActKey.
Installing a Driver and Software to a Computer
For the USB connection, setting is complete.
4.
Register a computer that is used for Secure Scan in the machine.
(Only when you use Secure Scan.)
Registering a Computer That is Connected
Memo
Your computer may automatically be registered when the scanner driver is installed.
If the computer information, such as computer name or IP address is changed, you
need to newly register the information.
Before Using Remote Scan with WSD Scan
1.
Set the machine for using WSD Scan on the machine.
2.
Set the type of stand-by mode for Remote Scan.
Before Using WSD Scan
3.
Install this machine as a WSD device to a connected computer.
For details, see
When the machine is installed in the computer, the computer is also registered to the
machine as a destination computer for WSD Scan.
Before Using Remote Scan with Image Capture (Mac OS X)
If you use Mac OS X, you can use Image Capture.
1.
Set the machine for using Remote Scan.
Before Using Scan To Computer
2.
Set the type of stand-by mode for Remote Scan.
Refer to the following.
Selecting a Remote Scan Mode
3.
Install the Mac OS X scanner driver.
Installing a Driver and Software to a Computer
For the USB connection, setting is complete.
4.
Register a computer that is used for Secure Scan in the machine.
(Only when you use Secure Scan.)
Registering a Computer That is Connected
Memo
"Before Using WSD
Scan".
253
Advertisement
Table of Contents
