Enabling the Access Control
Before enabling access control of the machine, you need to register user information on the
web page of the machine.
Access Control
1.
Press [Device Settings] on the touch panel.
2.
Press
or
3.
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "aaaaaa"
respectively.
4.
Press [OK].
5.
Press [Management].
6.
Press [System Setup].
7.
Press [Access Control] to set it to [Enable].
Memo
Pressing [Access Control] switches between [Enable] and [Disable].
When the access control is enabled, the following screen appears (when the
authentication type is Local).
several times and press [Admin Setup].
1014