Sending a Fax to a Destination Confidential Box (Fcode
Transmission)
You can perform Fcode confidential transmission by entering the sub address that is
registered to an Fcode confidential box of the recipient's machine. Check the destination
sub address before sending.
1.
Press [Fax/Internet Fax] or the
2.
Set a document in the ADF or on the document glass.
3.
Press [Fax].
4.
Press [Communicating Function] on the [Advanced] tab.
5.
Press [Fcode Tx].
6.
Enter the sub address of the box that is registered to the recipient's
machine.
The sub address is up to 20 characters in length.
7.
Press [OK].
8.
Press [Back].
9.
Add a destination on the [Fax] tab.
Specifying a Destination (Direct Entry)
Specifying a Destination (Phone Book)
Specifying a Destination (One-touch Button)
Specifying a Destination (Transmission History and Reception History)
10.
Change other settings if necessary, and then press the
button.
(FAX) button.
557
(START)