Before Using Wsd Scan; About Wsd Scan; Setting To Use Wsd Scan; Installing This Machine As A Wsd Device To A Computer - Oki MC853 User Manual

Before Using WSD Scan

About WSD Scan

Setting to Use WSD Scan

Installing This Machine as a WSD Device to a Computer

Setting a Binding Position for Duplex Scanning
About WSD Scan
This section describes how to set a computer to use the WSD Scan function. To use the WSD
Scan function, install the machine to the computer.
You can set WSD Scan from Scan To Computer or Remote Scan via a network.
To use WSD Scan, the machine must be connected to a computer with the following installed
via a network: Windows 8.1/ Windows 8/ Windows Vista/ Windows 7/ Windows Server
2012/ Windows Server 2012 R2/ Windows Server 2008/ Windows Server 2008 R2
Check the network connection before starting the procedure below.
Connecting This Machine to a Network
Setting to Use WSD Scan
To use the Scan To Computer (WSD Scan) function and the Remote Scan (WSD Scan)
function via the WSD Scan connection, follow the procedure below.
1.
Press [Device Settings] on the touch panel.
2.
Press or
3.
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "aaaaaa"
respectively.
4.
Press [Scanner Setup].
5.
Press [WSD Scan Setup].
6.
Check that [WSD Scan] is set to [Enable].
Memo
Pressing [WSD Scan] switches between [Enable] and [Disable].
7.
Press [Back] until the home screen is displayed.
Installing This Machine as a WSD Device to a Computer
several times to select [Admin Setup].
217