Oki MC853 User Manual page 823

Cannot read the file.
Files could not be read. Check the device where the files are stored.
File loading from USB.
Data is being read from USB Memory.
Press the Stop button to cancel reading.
An error occurred. Scanning is pending.
Printing has stopped due to an error.
Image Drum Sensor Error.
The toner sensor error has occurred in the image dram indicated on the screen.
Printing was stopped. Rear Output Tray was opened during printing. Open the
Output Tray. Error code: 409
The rear output tray was moved while printing.
Place the rear output tray in the correct position, and then open and close the output tray.
Toner empty. Replace with new Toner Cartridge.
The indicated cartridge ran out of toner.
Replace the empty toner cartridge with a new one.
Wait Timeout in menu is disabled. Printing is disabled except by USB. Clear page
buffer and enable time out in menu.
Wait Timeout is disabled.
Insufficient Memory occurred during Fax Tx reservation.
Insufficient Memory error has occurred during Scan To fax.
Insufficient Memory.
Insufficient Memory error has occurred during fax reception.
E-mail receiving has been cancelled.
E-mail reception was cancelled.
Check the file format and size of the attached file.
822