Table of Contents
Advertisement
Replacing the Image Drum and Toner Cartridge at the
Same Time
This section describes how to replace the image drum and toner cartridge with new ones at
the same time.
Note
Use extra care when handling the image drum (the green cylinder), because it is fragile.
Do not expose the image drum to direct sunlight or strong light (approximately 1,500 lux or
more). Do not leave the image drum for 5 minutes or more even under room light.
Use Oki Data genuine consumables to ensure optimum performance of the products.
Charges for services for problems caused by the use of consumables other than Oki data
genuine consumables are incurred, regardless of the warranty or in the maintenance
contract. (Although use of non-genuine consumables does not always result in problems,
use extra care when using them.)
1.
Prepare new image drum and toner cartridge.
2.
Hold the handle (A) to open the scanner unit.
3.
Insert your finger into the lever (B) on the right side of the
machine and pull the front cover open lever (1) to open the front
cover (2) forward.
626
Advertisement
Table of Contents
