Table of Contents
Advertisement
Adjusting the Density
You can adjust the density in seven levels.
1.
Press [Scan] or the
2.
Set a document in the ADF or on the document glass.
3.
Select a scan method.
Sending Scanned Data as an E-mail Attachment
Saving Scanned Data in USB Memory
Saving Scanned Data in a Shared Folder
Specify a destination by following the procedure for the selected scan method.
4.
Press [Image Settings] on the [Image Settings] tab.
5.
Press [Density] and press a density level.
Memo
[0] is the standard value. To increase the density, select [+1], [+2], or [+3] (darkest). To
decrease the density, select [-1], [-2], or [-3] (lightest).
6.
Change other settings if necessary, and then press the
button.
(SCAN) button.
162
(START)
Advertisement
Table of Contents
