Table of Contents
Advertisement
ECM Mode
PreFix
Received Time Stamp
Print Check Message
Duplex
Rotate Tx
Fax
Service Bit
Setting
Country Code
A/R Full Print
Daily Tx/Rx Log Report
Tone For Echo (For Transmission)
Tone For Echo (For Reception)
H/Modem Rate (For Tx)
H/Modem Rate (For Rx)
Attenuator
MF Attenuator
Pulse Make Ratio
Pulse Dial Type
MF(Tone) Duration
(3.9 inch)
ON
(NULL)
OFF
ON
OFF
ON
OFF
International
or U.S.A
ON
Setting
OFF
Print
0 Hour
Time
0 Minute
0 Second
Disable
Disable
33.6 Kbps
33.6 Kbps
10 dB,
Range: 0 -
15 dB
8 dB,
Range: 0 -
15 dB
40%,
Range: 33,
39, 40%
N, Range: N,
10-N, N+1
100
mseconds,
976
3.9 inches)
Sets whether to use the error
correction mode.
Sets the dialing prefix. You can
enter up to 40 digits.
Sets whether to print the time
stamp on received faxes.
Sets whether to report the error
content if a transmission error
occurs.
Sets simplex or duplex for printing
received fax and the binding
position for duplex printing.
Sets whether to enable or disable
the Rotate Tx function.
If set to OFF, some menu items are
not displayed on the screen.
Sets the country code.
Sets whether to print the list of the
communication results
automatically after every 50
communications.
Enables / disables to print a daily
report.
Sets the date and time for printing
the daily report.
Displays only if Service Bit is ON.
Displays only if Service Bit is ON.
Sets the default modem reception
transmission speed while the
machine is sending a fax.
Sets the default value of the
modem transmission speed while
the machine is receiving a fax.
Enter Attenuator. Displays only if
Service Bit is ON.
Enter MF(Tone) Attenuator.
Displays only if Service Bit is ON.
Sets to make rate of DP (10 pps)
during call. Displays only if Service
Bit is ON and Tone / Pulse setting
is PULSE.
Sets the pulse type for dialing.
Displays only if Service Bit is ON
and Tone / Pulse setting is PULSE.
Enter MF(Tone) Duration. Displays
only if Service Bit is ON and Tone /
Advertisement
Table of Contents
