Specifying The Data Location; Saving Data On A Computer Connected (Scan To Pc) - Oki MC160 User Manual

Specifying the Data Location

Select whether the computer or USB memory device is the location where
scan data is to be saved. When transmitting via a network, refer to "Specify-
ing the Destination Address (Scan to E-mail/FTP/SMB)" on page 6-12.
If an address has been specified as the destination for the data,
TO PC

Saving Data on a Computer Connected (Scan to PC)

In order to perform Scan to PC operations, the following requirements must
be met.
This machine is connected to a computer using a USB cable.
The TWAIN scanner driver, the printer driver and Scanner Utility (Win-
dows only) are installed on the computer.
Either the Scanner Utility is activated or the Scanner Utility icon
appears in the Windows notification area.
The document is positioned at the location specified with Paper
Source (Flatbed (original glass) or ADF) in the Scanner Utility.
For details on the Scanner Utility, refer to the online help.
Follow the procedure described below to send scan data to a computer con-
nected to this machine.
The scan settings specified with the Scanner Utility are given priority.
1
In the main screen (Scan mode), press the
, and then press the E
TO
2
Press the
key.
The scan data is saved in the folder specified with the Scanner Utility.
6-10
and
SCAN TO USB MEMORY
NTER
or key to select
cannot be selected.
or
key.
, and then press the E
SCAN TO PC
Scanning With the Machine
SCAN
key to select
SCAN
NTER