Sending While A Document Is Being Scanned - Oki MC853 User Manual

Sending While a Document is being Scanned (Memory
Transmission/Real time Transmission)
There are two types of automatic transmissions: Memory transmission which allows you to
start sending a fax after the document is scanned, and Real time transmission which allows
you to send a fax while the document is being scanned.
Memory transmission
Memory transmission is a method to send a fax after the document is scanned in the
Memory of this machine. You can take the document out without having to wait until the
transmission is complete, saving your time.
Real time transmission
Real time transmission is a method to send a fax directly to the recipient without scanning
the document in the Memory of this machine. The transmission starts immediately after
you complete transmission operation, allowing you to check that the data is sent to the
recipient.
[Memory Tx] is set by factory default.
To enable real time transmission, follow the procedure below.
Note
For the real time transmission and manual transmission, preview images cannot be
displayed.
If using the document glass with real time transmission, only one page can be scanned.
You cannot perform an operation that uses the ADF or document glass while a fax is being
sent with real time transmission.
1.
Press [Fax/Internet Fax] or the
2.
Set a document in the ADF or on the document glass.
3.
Press [Fax].
4.
Press [Communicating Function] on the [Advanced] tab.
5.
Press or
[OFF].
Memo
several times and press [Memory Tx] to set it to
(FAX) button.
520