Importing and Exporting Destination E-mail Addresses
Exporting Addresses to a File
Importing Addresses from a File
If you use the E-mail Address Manager of Configuration Tool, you can import and export the
e-mail address or group of the address book. The following section describes some
functions.
If you click
(Save to device), the changed settings are reflected to the machine.
Note
To use the E-mail Address Manager, install the User Setting plug-in.
About how to install the plug-in
Installing Software
About icons used in Configuration Tool
List of Icons used in Configuration Tool
Exporting Addresses to a File
1.
Click [Start], and then select [All Programs] > [Okidata] >
[Configuration Tool] > [Configuration Tool].
2.
Select the machine that has the addresses you want to export from
[Registered Device Table].
3.
Select the [User Setting] tab.
4.
Click [E-mail Address Manager].
5.
Enter the administrator password, and then click [OK].
The factory default password is "aaaaaa".
6.
Click
(Export to file).
7.
Enter the name of a file to be saved and the name of the save
destination folder, and then click [Save].
Note
After exporting, the edited CSV file may not restore properly.
Importing Addresses from a File
927