Printing E-mail Attachment Files
Setting a POP Server
Setting an SMTP Server
To use this function, you must set the e-mail reception settings on a POP server or SMTP
server.
Note
The following file formats are supported.
PDF (v1.7), JPEG, TIFF (V6 Baseline)
For the number of copies, duplex printing or other printing settings, the current settings on
the [Admin Setup] menu are applied.
Memo
Up to 10 files, each of which is a maximum of 8 MB, can be printed.
You can switch output destinations for printouts of attachment files from [E-mail/I-Fax] of
[Output Tray]. (Only for MC873 Series)
Setting Output Tray
You can forward attachment file of received E-mail.
Forwarding Received Document Data to an E-mail Destination or Shared Folder (Auto
Delivery)
Setting a POP Server
Memo
If the POP server does not support SSL encryption, you may not receive e-mails correctly.
1.
Open the Web page of this machine.
How to log in to the Web page
Log In as the Administrator
2.
Log in as the administrator.
3.
Select [Admin Setup].
4.
Select [Network] > [E-mail] > [Receive Settings].
5.
Select [POP3], and then click [To STEP2].
6.
Follow the on-screen instructions to set detailed settings.
331