Table of Contents
Advertisement
Set margins to a simplex document before copying.
Set [Direction] correctly.
Changing the Document Orientation (Direction)
1.
Press [Copy] or the
2.
Set a document in the ADF or on the document glass.
3.
Press [Margin] on the [Advanced] tab.
4.
To set the left or right margin, specify a margin in [Left] of [Front]
by using the 10-key pad or by pressing
To create a margin on the left side of the output, specify a positive value.
To create a margin on the right side of the output, specify a negative value.
5.
To set the top or bottom margin, specify a margin in [Top] of
[Front] by using the 10-key pad or by pressing
and then press [OK].
To create a margin at the top of the output, specify a positive value.
To create a margin at the bottom of the output, specify a negative value.
(COPY) button.
145
,
, and [+/-].
,
, and [+/-],
Advertisement
Table of Contents
