Faxing And Internet Faxing; Basic Procedure For Faxing; Sending A Fax - Oki MC361dn User Manual

3. Faxing and Internet Faxing

This chapter explains basic settings and operations for faxing and internet faxing and operations on
managing the phone book.

Basic Procedure for Faxing


This section explains basic operations for transmitting faxes. You need to configure the initial settings
before using the fax function.
Memo
 You can load only A4, letter, or legal size documents in the ADF, and A4 or letter size documents on the document glass.
 You cannot load mixed size documents for faxing.
Reference
 For details on initial settings for the fax function, refer to "Basic Settings for Faxing" P. 59.

Sending a Fax

Memo
 The machine puts priority on the ADF when scanning
documents. Be sure not to place documents on the ADF
when you use the document glass.
Press the <FAX> key on the operator
1
panel.
Place your document with text face up in
2
the ADF or face down on the document
glass.
Make sure that [Fax] is selected and
3
press to open the fax start screen.
OK
Check that [Add Destination] is
4
selected on the start screen and then
press .
OK
Specify a destination.
5
You can specify a destination from the ten-key pad, the
speed dial list, the group list, the transmission histories,
the reception histories, or the one-touch key pad.
Reference
 For details on each procedure, refer to "Specifying a
Destination" P. 81.
Configure the advanced functions if
6
necessary.
Reference
 "Configuring Fax Settings" P. 83
Press
7
M
ONO
When you want to scan multiple documents as a
single fax job using the document glass, enable
the continuous scan mode.
Reference
 For details on the continuous scan mode, refer to
"Enabling Continuous Scan Mode (Continuous Scan)"
P. 77.
Note
 You cannot use the
Memo
 By factory default, the documents are scanned with the
following settings.
[Scan Size] : A4
[Density] : 0
Reference
 For details on how to load your documents in the ADF or on
the document glass, refer to "Loading Documents" P. 72.
 When you want to specify multiple destinations, refer to
the User's Manual Advanced.
- 80 -
to start transmission.
button.
C
OLOR
[Resolution] : Normal