Sending A Fax To A Destination Confidential Box (Fcode Transmission) - Oki MC363 Advanced Manual

2
Press the button once to select [Admin Setup] and press the
3
Enter the administrator password, and then press the
The factory default administrator password is "999999". If the administrator password is changed, enter the
updated password.
4
Press the button to select [Fax Setup] and press the
5
Press the button to select [Fcode Box] and press the
6
Press the or button to select the box number and press the
7
When [Register] is displayed, press the
To edit a registered Fcode bulletin board box, select [Edit].
8
Press the button to select [Bulletin Box] and press the
9
Check that [Box Name] is selected, and then press the
10
Enter a box name.
You can enter up to 16 characters.
11
Select [Enter], and then press the
12
Press the button to select [Sub-Address], and then press the
13
Enter the a sub address using the numeric keypad, and then press the
(OK) button.
You can enter up to 20 characters including # or *.
14
Press the (OK) button.
button.
(OK) button.
button.
button.
button.
button.
button.
button.
(OK) button.
button.
Sending a Fax to a Destination Confidential Box (Fcode
Transmission)
You can perform Fcode confidential transmission by entering the sub address that is
registered to an Fcode confidential box of the recipient's machine. Check the destination sub
address before sending.
1
Press the (FAX) button on the operator panel.
The fax/Internet fax top screen appears.
2
Set a document in the ADF or on the document glass.
3
Check that [Fax] is selected, and then press the
4
Press the or button to select [Fax Functions] and press the
5
Press the or button to select [Fcode Tx] and press the
6
Press the or button to select [ON] and press the
7
Enter the sub address of the box that is registered to the recipient's machine.
The sub address is up to 20 characters in length.
8
Select [Enter], and then press the
9
Press the button.
10
Specify a destination.
Entering Fax Number to Send a Fax (User's Manual)
Specifying a Destination from Phone Book
Specifying a Destination Using One-touch Button
Specifying a Destination from Transmission History and Reception History
11
Change other settings if necessary, and then press the
- 172 -
button.
button.
button.
button.
(OK) button.
(MONO) button.
5. Fax