Recalling A Register - Sony MVS-8000X User Manual

2
For no display, press [Display], turning it off. To
display, press once more, turning it on.
When [Active Region] is off, regions with the
"Display Off" setting are not displayed in the Timeline
menu.
To return to the default precedence order and
timeline menu display settings
Press [Default] in the <Priority> group.

Recalling a Register

Use the numeric keypad control block to recall a register.
For each region there are 99 registers dedicated to
keyframes, numbered from 1 to 99.
When creating an effect as a user programmable DME, use
a 3-digit register number which is commonly used for all
DME regions (channels).
For a description of the concept of regions and registers,
see "Regions" (page 379) and "Registers" (page 380).
Recalling a register from the numeric
keypad control block
Display
EFF button
RCALL button
Region selection buttons
Numeric keypad control block
1
Press the [EFF] button, turning it on.
This allocates the numeric keypad control block to
keyframe operations, and the [RCALL] button lights.
2
Press the button corresponding to the region you want
to select, turning it on.
You can also press more than one button.
[M/E 1], [P/P]: These select the corresponding M/E-1
and PGM/PST regions.
[USER 1] to [USER 8]: These select the User regions.
[DME 1] to [DME 8]: These select the DME
channels.
[DEV 1] to [DEV 12]: These select the regions Device
1 to Device 12, respectively.
[P-BUS]: This selects P-Bus.
[GPI]: This selects GPI.
[MCRO]: This selects Macro.
UNDO button
Numeric keypad
Recalling a Register
389