Application > Epson Fx Setup - Printronix t8000 Administrator's Manual

Application > Proprinter Setup > FF valid at TOF
The FF valid at TOF option determines whether the printer will perform a
Form Feed when the host sends a Form Feed command, if the printer is at
the top of form.
Disable
Enable
Factory Default
Determines how control codes hex 80-9F are handled.
Set 1
Set 2
Factory Default
Application > Epson FX Setup
IMPORTANT
The Epson FX Setup submenu will only be present when the LP+ Emulation
menu is set to Epson FX. Otherwise, this menu will be replaced with the LP+
Emulation menu.
Application > Epson FX Setup > Character Group
This option selects the Character Set Group. Based on the group selected,
then the character set can be chosen with the menu following XXX Sets. The
group Standard Sets is shown below because it is unique to Epson FX. All
other groups are similar and described in LP+, PGL, VGL Character Sets.
Will not perform a form feed when the host sends a
Form Feed and the printer is at the top of form.
Performs a form feed when the host sends a Form
Feed and the printer is at the top of form.
Enable
Application > Proprinter Setup > Alt. Char Set
Interprets data in the range of hex 80 through hex 9F
as a control code.
Prints data in the range of hex 80 through hex 9F.
Set 1
173