Printronix t8000 Administrator's Manual page 131

Application > PGL Setup > Ext Execute Copy
Determines if dynamic text or overlay data is allowed when the Form Count
parameter (number of forms to print) is used as part of the EXECUTE
command.
Dynamic data, overlay data, etc. are not allowed if the
Disable optional Form Count parameter is specified (IGP-100
compatible).
Dynamic data, overlay data, etc. are allowed within a
form where the Form Count parameter is specified. In
Enable
this case, the same form is printed for whatever the
Form Count is.
Factory Default Disable
When enabled, incremental data is not
incremented since the printing page is the same.
IMPORTANT
Overlay data is only printed with the first form and
not on subsequent forms, and each form is printed
on a separate page.
Application > PGL Setup > AI 00 Spaces
This option is designated for EAN/UCC-128 barcodes whose application
identifier (AI) is 00.
The printable data field is printed with the AI enclosed
Disable in parentheses. This is the standard EAN/UCC-128
format.
The printable data field is printed with the UCC fields
Enable separated by spaces. This option is IGP-X00
compatible.
Factory Default Disable
Application > PGL Setup > Select SO Char
Allows you to specify a decimal code from 0 through 255 to be used in place
of SO (Shift Out) as the control code which allows access for the alternate
set of control function characters. See the description of the Code 128
barcodes in the PGL Programmer's Reference Manual for details.
Minimum 0
Maximum 255
Factory Default 14
131