Standard Features
•
512MB DRAM memory (fixed).
•
128MB Flash memory (fixed).
•
Auto Label Mapping®: For compatibility with programs written for Printronix line matrix printers.
•
Bar Codes: Supports over multiple types of 1-D and 2-D bar codes.
•
Download: Fonts, forms, and graphics to printer memory.
•
Emulations:
•
Printronix LinePrinter Plus® (LP+). Provides direct compatibility with Printronix P-Series
printers, Epson FX-1050, Proprinter IIIXL, and Serial Matrix Printers.
•
Printronix PGL®. Provides printer system commands for text, barcodes, graphics, lines, and
boxes.
•
Printronix VGL. Emulates the QMS Code V™ Version II programming language to produce
on-line forms, bar codes, and alphanumeric text generation in both normal and high resolution.
•
ZGL interpreter for legacy ZPL (Zebra®) applications
•
TGL interpreter for legacy TEC (TEC®) applications
•
IGL interpreter for legacy IPL (Intermec®) applications
•
STGL interpreter for legacy SPL (SATO®) applications
•
DGL interpreter for legacy DPL™ (Datamax®) applications
•
IEGL interpreter for legacy IER-520® (IER®) applications
•
MGL interpreter for legacy MPCL II® (Monarch®) applications
•
High Resolution Printhead: For sharp graphics and text.
•
Label Taken Sensor: Detects removal of labels in Tear-Off mode (and in Peel-Off mode when
optional rewinder is installed).
•
Network Interface Port: This interface allows you to attach the printer to a LAN (Local Area Network).
The port is visible on the back panel. The Ethernet port is a 10/100Base and supports data transfer
rates up to 100 Mbps. The PrintNet Enterprise Suite (PNE) remote management software can be
downloaded from www.PrintronixAutoID.com/support/drivers.
•
Resident Fonts: Letter Gothic Bold (#93779), Courier Bold (#93952), CG Triumvirate Bold
Condensed (#92250), OCR-A (#90993), OCR-B (#91409), CG Triumvirate (#92244), CG Triumvirate
Bold (#92248), and CG Times New Roman (#92500).
•
SD memory card slot: Supports SD cards from 4 to 32 GB.
•
Serial RS-232
•
Tear-Off Mode: Positions the label at the tear-off position and detects its removal before printing the
next label.
•
Tear-Off Strip Mode: Prints a specified number of labels and positions the last label at the tear-off
position.
•
Thermal Transfer and Direct Thermal Printing: On all printers
•
USB 2.0 Universal Serial Bus
15