This menu selects the port number the printer sends the emulation status.
Minimum
Maximum
Factory Default
This menu selects which port the printer expects PNE (PrintNet Enterprise) to
connect to, via Ethernet or USB. The factory default is Ethernet.
Disable
Ethernet
USB
Factory Default
This menu selects the port number the printer expects PNE to connect
through.
Minimum
Maximum
Factory Default
If PNE has not communicated to the printer within a timeout period, the PNE
session closes.
Minimum
Maximum
Factory Default
102
System > Printer Mgmt > Status Port Number
1025
65535
3002
System > Printer Mgmt > PNE Port Choice
PNE communication will be disabled.
Use Ethernet to connect with PNE.
Use USB to connect with PNE.
Ethernet
System > Printer Mgmt > PNE Port Number
1025
65535
3001
System > Printer Mgmt > PNE Port Timeout
1 second
255 seconds
100 seconds