Epson Fx Emulation - Printronix P5005B User Manual

Printer
Protocol
(from page 147)
Epson FX
Define CR
Code
CR = CR* Enable*
CR = CR + LF Disable
Alt. Set
80-9F
Control Code*
Printable
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es

Epson FX Emulation

Auto LF Define LF
Code
LF = LF* Disable*
LF = CR + LF Enable
Define CR Code
The Define CR Code option controls the action of the printer when it
receives a Carriage Return code (hex 0D) from the host computer.
If this feature is enabled, each time the printer receives a Carriage
Return, it inserts an additional Line Feed code (hex 0A) into the
data stream. Do not use this feature if the host computer sends
Line Feeds to the printer.
•
CR = CR. Does not insert an extra Line Feed after each
Carriage Return.
•
CR = CR + LF. Inserts an extra Line Feed after each Carriage
Return.
Epson FX Emulation
* = Factory Default
Printer Character
Select Set Condensed
(see page 174) Enable*
Disable
20 CPI
171