Printronix t8000 Administrator's Manual page 117

Application > IPDS Setup > Resident Fonts
This option selects either a bit-mapped font ("Compatible") or a scalable font
("Scalable") as the default font.
Compatible Selects a bit-mapped font as default.
Scalable Selects a scalable font as default.
Factory Default Compatible
Application > IPDS Setup > XOH-SMO Support
This option allows the user to disable reporting of XOH-SMO support in the
STM reply.
Disable Do not report that IPDS has support for XOH-SMO.
Enable Report that IPDS has support for XOH- SMO.
Factory Default Enable
Application > IPDS Setup > LF3 Support
This option allows the user to enable reporting of LF3 type coded font
support in the STM and OPC replies. Refer to the IPDS Programmer's
Reference Manual for more information.
Do not report that IPDS has support for LF3-type
Disable
coded fonts..
Report that IPDS has support for LF3-Type coded
Enable
fonts.
Factory Default Disable
Application > IPDS Setup > Print IPDS Fonts
This executable menu allows you to print a list of all resident fonts currently
available in the active IPDS emulation (4028 or 3816). See examples below
for both IPDS emulations.
117