Printronix t8000 Administrator's Manual page 163

Application > P-Series XQ Setup > Control Code 06
Control Code 06 defines the function of ASCII code 06 hex (ACK). You can
select an alternate line spacing of 6.0, 8.0, or 10.3 LPI.
Selections 6.0, 8.0, or 10.3 LPI
Factory Default 8.0 LPI
Application > P-Series XQ Setup > Compressed Print
Controls which host command enables compressed printing.
Char 01 SOH
Char 03 ETX
Char 09 HT
Factory Default Char 01 SOH
Application > P-Series XQ Setup > Elong/Alt. Font
Controls which host command sets elongated (double high) fonts and
extended character set.
ELNG=BS Elongated set by BS (08 hex), extended character set
FONT=SO set by SO (0E hex).
ELNG=SO Elongated set by SO (0E hex), extended character set
FONT=BS set by BS (08 hex).
Factory Default Elng=BS FONT=SO
Application > P-Series XQ Setup > Gothic Typeface
Controls which host command sets Gothic printing.
Char 02 STX
Char 03 ETX
Char 09 HT
Factory Default Char 02 STX
163