Printronix t8000 Administrator's Manual page 140

Determine if logos and alphanumeric strings are treated as separate
elements or appends logos to alphanumerics.
Disable
Enable
Factory Default
Prevents the printing of Error 48 (Element Off Page Error) if alphanumeric
data, including spaces, extends beyond the right side of the form.
Disable
Enable
Factory Default
Determines how line lengths are calculated – used for compatibility.
Disable
Enable
Factory Default
Determines how data after the ^PY command will be handled.
Absorb Motion
Absorb All
Disable
Factory Default
140
Application > VGL Setup > Append Rotated
Logos and alphanumeric strings are treated as
separate elements.
Appends logos to an alphanumeric.
Disable
Application > VGL Setup > Truncate Alpha
Prints Error 48 if the right side of the form is violated.
Inhibits Error 48 and prints the form regardless.
Enable
Application > VGL Setup > True Vert 1/10
When disabled and in High Resolution, a vertical line's
length in one inch and 1/10 inch increments is
interpreted as 70/72 inch and 7/72 inch respectively.
When enabled, a vertical line's length is interpreted
exactly, which is 72/72 inch in one inch increments.
Disable
Application > VGL Setup > Absorb After ^PY
The paper motion line terminator immediately following
the graphics ^PY command will be ignored.
The system ignores all the data following ^PY until a
host generated terminator is detected and ignored.
System terminators following a graphics command are
sent to the printer and result in paper motion.
Absorb Motion