E Media Cutter Tray Installation; Assembling The Media Cutter Tray - Printronix t8000 Administrator's Manual

Hide thumbs Also See for t8000:

Table of Contents

Media Cutter Tray

Installation

Figure 26 Attaching the Cutter Tray Bin to the Cutter Tray Base

1. Align the flanges of the cutter tray bin with the slots in the cutter tray base.

2. Push the flanges into the slots, then push the cutter tray bin downward to secure it.

3. Attach the cutter tray bin in a position so that the labels will not interfere with cutter operation. (For

longer labels, attach the cutter tray bin to a lower position; for shorter labels, attach it to a higher