Printronix t8000 Administrator's Manual page 116

This option rotates the physical IPDS page.
90
180
270
Factory Default
Controls how the IPDS emulation checks for dots that fall outside the
intersection of the logical and physical pages and whether an error is
reported to the host system.
Disable
Enable
Factory Default
This option specifies which algorithm is used for expanding a character
string in Write Graphics.
Compatible
Scalable
Factory Default
116
Application > IPDS Setup > Page Rotation
0 No rotation is applied.
90 degree clockwise rotation is applied.
180 degree rotation is applied.
270 degree clockwise rotation is applied.
0
Application > IPDS Setup > VPA Check
IPDS does not report dots outside the printable area.
If dots fall outside the printable area, IPDS reports an
error to the host if the IPDS Exception Handling
Control command setting requires error reporting.
Enable
Application > IPDS Setup > Expanded Fonts
A resizing and smoothing algorithm will be performed
on the bitmapped font.
A substitution will be done to a scalable outline font.
Using Scalable will increase performance and quality,
however, the substitution will only be done for Latin 1
characters of resident bitmapped fonts, and the type is
limited to Courier and Gothic. A scalable font cannot be
selected directly, and an LF3 format cannot be
downloaded.
Scalable