Epson Fx Emulation - Printronix P8000 Plus Series Administrator's Manual

Epson FX Emulation

Printer
Protocol
(from page 102)
Epson FX
Define CR
Autowrap
Code
CR = CR* With LF+CR*
With CR
CR = CR + LF
Disable
Define CR Code
The Define CR Code option controls the action of the printer when it receives a Carriage Return code
(hex 0D) from the host computer. If this feature is enabled, each time the printer receives a carriage
return, it inserts an additional Line Feed code (hex 0A) into the data stream. Do not use this feature if the
host computer sends line feeds to the printer.
•
CR = CR (factory default). Does not insert an extra line feed after each carriage return.
•
CR = CR + LF. Inserts an extra line feed after each carriage return.
Autowrap
This option defines the printer actions when print data is received past the forms width setting.
•
With LF+CR (factory default). Performs an automatic carriage return and line feed when data is
received past the forms width.
•
With CR. Performs an automatic carriage return (without line feed) when data is received past the
forms width.
•
Disable. Discards any data past the forms width.
Define LF Code
The Define LF Code option controls the action of the printer when it receives a Line Feed code (hex 0A)
from the host computer. If this feature is enabled, each time the printer receives a Line Feed, it inserts an
additional Carriage Return code (hex 0D) into the data stream. This feature is required if the host
computer does not send carriage returns to the printer.
•
LF = LF (factory default). Does not add a carriage return with a line feed.
•
LF = CR + LF. Adds an extra carriage return with each line feed.
Printer Select
•
Disable (factory default). Ignores the ASCII DC1 and DC3 control codes.
•
Enable. Disables the printer when a DC1 control code is received, and enables the printer when a
DC3 control code is received.
*= Factory Default
Define LF
Printer Select
Code
LF = LF* Disable*
LF = CR + LF Enable
Character 20 CPI
Set Condensed
(see page 137) Enable*
Disable
Alt. Set 80-9F
Control Code*
Printable
135