Printronix t8000 Administrator's Manual page 137

Application > VGL Setup > Power-up ^F
Determines if VGL will be in free format mode at power-up. Free format
mode is when VGL ignores carriage returns, line feeds, and all characters
below 20 hex sent from the host.
Disable VGL is not in free format mode.
VGL starts in free format mode and ignores all
Enable
characters below 20 hex.
Factory Default Disable
Application > VGL Setup > Power-up ^PY
Determines if VGL will be in graphics mode at power-up.
Disable VGL is not in graphics mode.
Enable VGL starts in graphics mode at power-up.
Factory Default Disable
Application > VGL Setup > LPI
Sets the LPI that will be used in VGL forms.
Minimum 6
Maximum 10
Factory Default 6
Application > VGL Setup > Btm Margin Ctl
Determines the page's bottom margin.
A change in text length has no effect, and the bottom
margin setting in the LP+ Emulation menu will be used,
LP+ Menu
although the new text length value still shows in the
menu.
Text length changes the bottom margin value in the
VGL Text
LP+ Emulation submenu as follows: Bottom = physical
Length
page length-top margin-text length.
Factory Default LP+ Menu
137