System > Printer Mgmt - Printronix t8000 Administrator's Manual

This menu can be used to update the configuration within the QCMC image
stored on the SD card (see Appendix H Quick Change Memory Card
(QCMC) page 307).
This menu can be used to erase the QCMC image stored on the SD card
(see Appendix H Quick Change Memory Card (QCMC) page 307).
System > Printer Mgmt
This option defines the interface being used to receive the emulation status
command.
Automatic
Serial
Factory Default
This option selects the port for return Status Commands used by the
emulations. For PGL, this is the ~STATUS command, and for ZGL, this is
the ^HS command.
Automatic
Disable
E-NET Data
Port
Serial
E-NET Stat Port
USB
IEEE-1284
Factory Default
System > SD File Edit > QCMC Update
System > SD File Edit > QCMC Erase
System > Printer Mgmt > Rcv. Status Port
When selected, the status command is sent to the
printer with the print data through the active host
interface.
When selected, the status command is sent to the
printer through the serial interface regardless of the
active host interface.
Automatic
System > Printer Mgmt > Ret. Status Port
Sends the data through the same port as used to
receive the application job.
Status is not sent back to the host.
Ethernet data port.
Serial RS-232 port
Ethernet port as set in Status Port Number menu
USB
IEEE-1284 parallel interface
Automatic
101