Printronix t8000 Administrator's Manual page 197

Network > Ethernet > Gateway Address
This item allows you to set the Gateway Address for the TCP/IP protocol
using a virtual keyboard. Make sure you enter the complete Gateway
address, including the period symbol between the segments.
Structure Seg1.Seg2.Seg3.Seg4
Factory Default 000.000.000.000
Disable BootP, ARP or DHCP before trying to
IMPORTANT
change the gateway address.
If the printer has not rebooted after disabling
IMPORTANT
BootP, ARP or DHCP then the value shown is not
the static value. You MUST save this value or it will
be lost when the printer is rebooted.
If changed, the printer reboots when it is placed
IMPORTANT
ONLINE.
Network > Ethernet > MAC Address
This item is the Manufacturer's Assigned Number, and is unique for each
NIC. It is read-only.
It is read-only.
IMPORTANT
Network > Ethernet > DHCP
You can enable/disable the DHCP protocol using this option, but consult
your administrator for the appropriate setting.
DHCP is disabled and you set your own static IP
Disable
address, subnet mask, and gateway address.
DHCP is enabled and IP address, subnet mask, and
Enable
gateway address is assigned dynamically.
Factory Default Enable
If changed, the printer reboots when it is placed
IMPORTANT
ONLINE.
197