Printronix t8000 Administrator's Manual page 112

You can enable a CST (Character Substitution Table) with this menu. The
CST is loaded in the printer FLASH memory and will be executed by the PAA
(Printronix Application Adapter). Refer to the PrintNet Enterprise Suite
User's Manual to learn more about how to create and use CSTs.
None
CST-1
CST-2
Factory Default
IMPORTANT
This parameter allows you to make T8000 series thermal printers compatible
with other printers.
When trying to preserve compatibility with respect to barcodes, you may not
always be able to make them equal in size. This is due to the various
dot-per-inch differences between printer types. When an exact match cannot
be made, the barcode is reduced in size so that the form bounds will not be
compromised and the barcode will be readable.
Default
Laser
P5000
T3000
T1006
Factory Default
112
Application > Control > PAA: Select Tool
No CST will be active.
CST-1 is active.
CST-2 is active.
None
A CST loaded in the printer FLASH memory can be
viewed in the System > Flash File View submenu
and is also visible in the Configuration Printout
header.
Application > Control > Compatibility
Use for optimum performance.
Forces the output to correspond with the Printronix
laser line of printers.
Forces the output to correspond to the P5000 line of
line matrix printers.
Forces the ouput to correspond to the T3000 line of
thermal printers.
Forces the output to correspond to the T1006 line of
thermal printers.
Default