Printronix t8000 Administrator's Manual page 152

Specifies where the text will be positioned in the line space.
Top of Line
Bottom of Line
Factory Default
IMPORTANT
Specifies form length in three different units for all preferences of the user:
inches, millimeters, and even lines.
Minimum
Maximum
Factory Default
IMPORTANT
152
Application > LP+ Setup > Text Position
Text is positioned at the top of the line space.
Text is positioned as if it were at the bottom of a line
space at 6 LPI. The following example picture below
shows both Top of Line and Bottom of Line positions.
Bottom of Line
This option does not apply to OCR-A or OCR-B.
Application > LP+ Setup > Form Length (xx)
0.1 inches
99.0 inches
T8x04: 6.0 inches
T8x06: 4.0 inches
T8x08: 6.0 inches
Only lines are available when TN5250 is enabled.