Printronix t8000 Administrator's Manual page 111

Application > Control > Active LP+ Emul
This function allows you to select the Active LinePrinter+ protocol. The LP+ is
used to print text or jobs that are not associated with any IGP emulation. Refer to
the LinePrinter Plus Programmer's Reference Manual for more information.
P-Series Printronix P-Series language.
P-Series XQ Printronix P-Series XQ language.
Serial Matrix Emulates the Serial Matrix protocol.
Proprinter XL Emulates the Proprinter XL protocol.
Epson FX Emulates the Epson FX-1050 protocol.
Factory Default P-Series
The LP+ emulation selections are NOT available
IMPORTANT
when System > Control > Program Select is set to
PS/PDF.
Application > Control > PTX Setup SFCC
Allows you to choose the hex value of the ASCII character you wish to use
as the SFCC for the PTX SETUP command.
Minimum hex 01
Maximum hex FF
Factory Default hex 21 or the "!" character
Application > Control > PTX Setup Parse
Determines how PTX_SETUP commands as described in the section "The
PTX_SETUP Commands" on page 299 are handled within the data stream.
Enable Will parse and execute the PTX_SETUP commands.
Ignore Will parse PTX_SETUP commands but ignore them.
Will not parse PTX_SETUP command so they will be
Disable
treated as normal text.
Factory Default Enable
111