Printronix t8000 Administrator's Manual page 141

Application > VGL Setup > UPC Descenders
Determines how descenders will be printed on UPC/EAN bar codes when
there is no human readable data included.
UPC/EAN bar codes are printed without descenders if
Disable
there is no human readable data.
UPC/EAN bar codes are printed with descenders,
Enable
even if there is no human readable data.
Factory Default Enable
Application > VGL Setup > Select SO Char
Allows you to specify a decimal code from 0 through 255 to be used in place
of SO (Shift Out) as the control code which allows access for the alternate
set of control function characters for Code 128 barcodes. See the
description of the Code 128 barcodes in the VGL Programmer's Reference
Manual for details.
Minimum 0
Maximum 255
Factory Default 14
Application > VGL Setup > Rot. Char Size
Determines how expanded characters will be sized when rotated.
Rotated (clockwise/counterclockwise), expanded
Adjusted characters have a different size than an unrotated
character with the same size parameters.
Rotated, expanded characters will be the same size as
Not Adjusted
unrotated characters with the same size parameters.
Factory Default Adjusted
Application > VGL Setup > Ignore Spaces
Controls how trailing spaces are treated within alphanumeric elements.
Trailing spaces are not deleted from alphanumeric
Disable
elements in a graphics pass.
Trailing spaces are deleted from alphanumeric
Enable
elements in a graphics pass.
Factory Default Disable
141