Application > Fonts - Printronix t8000 Administrator's Manual

Application > Epson FX Setup > 20 CPI Condensed
Compressed print characters are narrower than the normal character set.
This is helpful for applications where you need to print the maximum amount
of information on a page.
Disable
Enable
Factory Default
Determines how data in the range 80 hex – 9F hex will be treated.
Control Code
Printable
Factory Default
Application > Fonts
IMPORTANT
This option is not available when System > Control > Program Select is set to
PS/PDF
This menu entry permits you to adjust the thickness or font weight of
standard text fonts.
Minimum
Maximum
Factory Default
This menu entry permits you to adjust the thickness or font weight of bold
text fonts.
Minimum
Maximum
Factory Default
Does not compress print widths, even if condensed
print is chosen by the host.
Prints about 60% of the width of normal characters
when compressed print is chosen by the host
computer.
Enable
Application > Epson FX Setup > Alt. Set 80-9F
Interprets as a control code.
Prints data in this range.
Control Code.
.
Application > Fonts > Standard Chars.
0
512
340
Application > Fonts > Bold Chars.
0
512
448
177