Printronix t8000 Administrator's Manual page 151

Application > LP+ Setup > Bold
To determine if the text printed by the LP+ uses a heavy thickness.
Disable
Enable
Factory Default
Application > LP+ Setup > Italic Print
To determine if the text printed by the LP+ uses italics.
Disable Text is printed normally.
Forward Slant Text is printed with a forward slant.
Backward Slant Text is printed with a backward slant.
Factory Default Disable
Application > LP+ Setup > Slashed Zero
This parameter allows you to print the numeral '0' with or without the slash.
Disable Zero is printed without a slash.
Enable Zero is printed with a slash.
Factory Default Disable
IMPORTANT
This option does not apply to OCR-A or OCR-B.
Text is printed normally.
Text is printed with a heavy thickness.
Disable
151