Printronix t8000 Administrator's Manual page 160

Determines how data in the range 80 hex – 9F hex will be treated.
Control Code
Printable
Factory Default
Application > P-Series Setup > SFCC d command
This menu option is for backward compatibility.
Even dot plot
Double High
Factory Default
Application > P-Series Setup > PSeries Dbl High
This menu option allows printing compatibility between the current and older
models of Printronix printers.
Normal
P3/4/6/9
Compat.
Factory Default
The FF valid at TOF option determines whether the printer will perform a
Form Feed when the host sends a Form Feed command, if the printer is at
the top of form.
Disable
Enable
Factory Default
160
Application > P-Series Setup > Alt. Set 80-9F
Interprets as a control code.
Prints data in this range.
Control Code.
This option interprets the SFCC d command as even
dot plot.
This option interprets the SFCC d command as double
high. Select this option for backward compatibility.
Even dot plot
This is normal Double High printing for current model
printers.
Where older printers printed two dot rows higher, this
option allows for compatibility by raising the print two
dot rows to match the current models dot row value
(two dot rows lower).
Normal
Application > P-Series Setup > FF valid at TOF
Will not perform a form feed when the host sends a
Form Feed and the printer is at the top of form.
Performs a form feed when the host sends a Form
Feed and the printer is at the top of form.
Enable