4. Reconnect your test device.
5. lb better view the measurement trace, press:
. . . , . , . _ . , . . , . , . / . . . . . . / . . . . .
6. To locate the maximum amplitude of the device response, as shown in Figure 2-30,
Figure 2-30. Example Magnitude Response Measurement Results
Measuring Insertion Phase Response
7. To view both the magnitude and phase response of the device, as shown in Figure 2-31,
press:
The channel 2 portion of Figure 2-31 shows the insertion phase response of the device under
test. The analyzer measures and displays phase over the range of - MO0 to + 1800. As phase
changes beyond these values, a sharp 360° transition occurs in the displayed data.
Figure 2-31. Example Insertion Phase Response Measurement
. .
. . . . . . , . . . . . .
. . . a %. ; ; A . . . : . A . . i . / .
press: