Offsetting Limit Lines - HP 8753E User Manual

Offsetting Limit Lines

The limit offset functions allow you to adjust the limit lines to the frequency and output level
of your device. For example, you could apply the stimulus offset feature for testing tunable
This example shows you the offset feature and the limit test failure indications that can appear
on the analyzer display.
1. To offset all of the segments in the limit table by a fixed frequency, (for example, 3 MHz),
press:
The analyzer beeps and a FAIL notation appears on the analyzer display, as shown in
Figure 2-45.
Figure 2-45. Example Stimulus Offset of Limit Lines
2. To return to 0 Hz offset, press:
. . . . . . . . / / . . . . _
3. To offset all of the segments in the limit table by a fixed amplitude, press:
The analyzer beeps and a FAIL notation appears on the analyzer display.
Measurements
Making