HP 8753E User Manual page 254

4. 'lb define the THRUAJNE standard, press:
5.
To define the LINE/MATCH standard, press:
6.
For the purposes of this example, change the name of the standard
. . . . . . . . ,/ . . . . . . . / . . . . . . . . . . . . . . . . . . . . . . %. , : I . . . . . . . . . . . A . . . A . > > . . . A . ; ; . . . . . . . ~ . ; ~ : . . . . ~ . i . : : ~: : : . . . m . = i : ; : . : : : . . . '
and then modify the name to "MATCH".
7. When the title area shows the new label, press:
Assign the Stadards to the Various TRM Classes
8.
To assign the calibration standards to the various TRL calibration classes, press:
9. Since you previously designated standard #l for the REFLECT standard, press:
10. Since you previously designated standard #3 for the LINE/MATCH standard, press:
11. Since you previously designated standard #4 for the THRWLINE standard, press:
12. To complete the specification of class assignments, press:
Optimizing Measurement Results